How to Install a Square Shower Tray?

A square shower tray is the most popular model chosen by those deciding to install a shower cabin in their bathroom. This type of tray is often a substitute for a bathtub. There are many variants available, with both shallow and deep products. However, the most important action when dealing with any shower tray is its installation method. Read to learn the most important information about installing a shower tray in your bathroom.

Installing a Square Shower Tray — What You Should Know

The first essential step to take before placing the square shower tray and shower cabin in the bathroom is proper preparation. Most important information is usually found in the manufacturer's instructions. This is where you will find answers about what you should do or buy first. Furthermore, it is also the place that will inform you about which adhesive or silicone to use, which siphon version to choose, and what type of gaskets you need to install.

The next step is to determine where to install the shower tray. This is especially critical when installing the entire sewage system, its drainage, and a series of pipes. Of course, at this initial stage, it is necessary to determine whether a low tray or a high one will be installed. At this point, you can also decide whether you want the shower to stand on legs or be installed directly in the floor. If you have trouble making a decision, just check the manufacturer's website in advance to see how both versions look.

Installing a Square Shower Tray on Legs — Step by Step

1. First, take care of the drainage. Connect the drainage opening to the appropriate size siphon and sewage pipes. Also, remember to install an overflow. In this case, use gaskets and overflow pipes.
2. The next step is to install the legs. Use a drill for this task to ensure that the tray legs are stable during the use of the entire shower. Remember to measure the masking panel beforehand, which must be the same height as the leg dimensions.
3. Proper installation of the shower tray at this stage requires using a level to help with its regulation and to determine the slope of the water drainage to the sewage system.
4. Next, place the properly leveled tray with the attached drainage in the chosen spot in the bathroom. Use silicone around the tray, especially at the points close to the wall.
5. If you do not choose an original panel that masks the legs, use materials for encasement, for example, create a wall from ceramic tiles.

What to Do When Installing a Square Shower Tray Directly in the Floor?

If the choice has fallen on a low shower tray, the first step is to select a place on the floor for its placement. Remember that this step should already be considered when laying the floor tiles, as you need to create a slope necessary for proper water drainage. Therefore, the installation of the siphon occurs in a different order, that is, directly on the floor. Next, check where the outlet opening is located, as this is crucial at this stage, and place the drainage in it. Remember to monitor the entire installation of the shower tray with a level. This solution helps to prevent certain irregularities from occurring in this area of the sewage system. Of course, installing the shower tray requires the use of insulation at points where it meets the wall. Therefore, appropriate quality silicone should be used.

How to Install a Shower Tray - Summary

When performing the installation of the shower tray yourself, it is essential to remember a few critical things.

• Plan (if you can, check the website or the store) what type of shower tray will suit you. This is extremely important because you need to have an awareness of where it will stand and whether it will be set on legs or directly on the floor. Therefore, choose a model that meets your needs, such as a square shower tray by Mexen.
• Check what the instructions say about installing your tray; it will also describe the materials needed for its proper placement.
• Remember items like installation glue, gaskets, siphon, pipes — all these are part of a correctly created sewage system.
• Make the appropriate drainage opening, properly install the upper part of the siphon, and ensure the correct installation of the shower cabin or potential masking of the legs.

Installing a shower tray doesn't have to be troublesome. You just need to follow the instructions step by step. This way, you can quickly achieve an appealing look for your bathroom with a very practical and functional shower tray.