Where to Start When Replacing a Shower Hose?
Replacing this part, which is the shower hose, doesn’t take much time, and the entire process can be done quickly:
- first, turn off the water and wait a moment. This way, water leaking from the shower hose won’t flood your bathroom;
- next, proceed to unscrew the head and the shower handle. During this task, use a towel or cloth, as a bit of water may leak from the shower hose;
- if the elements of the shower faucet have limescale, hard water deposits, or rust, you can use a mixture of vinegar and water 50:50 to unscrew the shower head. This will help dissolve the limescale;
- unscrew the hose from the shower faucet. You can do this with a wrench of the appropriate size. Try not to damage other shower parts;
- the next step is to unscrew the old shower hose and replace it with a new one. Make sure all connections are properly tightened. However, pay attention not to over-tighten them;
- while replacing the hose with a new one, also take care to clean the shower handle. Simply soak it in products you have at home – a mixture of vinegar and water, and then prepare a 1:1 solution. To clean the shower hose, also use a preparation made from citric acid and water. Check if you have such products at home. By using these options, your shower won’t be damaged.
How to Repair a Leaking Shower Hose?
One of the most common types of faults is a leaking hose. Some sets include a hose in a metal braid. The rubber tube usually breaks due to a sudden pull on the handle or due to the deposits of water and limescale on it. Repair it by sealing its braid with a repair kit or Teflon tape. Damage to the shower hose can also cause twists if it is too long, so it's worth considering shortening its length. If your hose has too much damage, its repair may not be advisable. In that case, it’s best to replace it with a new model. Try to choose one that will have the appropriate length. Leaks in a shower hose can also be influenced by leaving soap residues on it. This causes the hose to lose its flexibility and become more brittle. You should use agents recommended for removing contaminants from aluminum and rubber to clean it. This way, the hose will not lose its properties. If you don’t want the hose to leak, choose a model with a rubber braid reinforced with aluminum. Such hoses are a bit more expensive but are definitely more resistant to external factors.
What Are the Other Most Common Types of Faults in Shower Hoses?
The cause of a leaking shower hose can be cracks in the rubber tube. In this situation, you should unscrew the handle and the shower faucet and try to shorten it. The entire process should start with disassembling the hose connections. You will also need to unscrew the connecting nut that connects the hose to the devices. A leaking shower hose can also be caused by loosening connecting nuts at the junction point with the faucet. Just tighten them and then check if the hose still leaks at the same spot. If tightening doesn’t help, the shower seals may be damaged. When removing the nut from the device, be careful not to scratch the chrome plating. Damage to the hose can also result from too intense changes in pressure in the bathroom device. A good solution is to change the pressure intensity or change it less often during bathing.
How to Choose a New Shower Hose?
If you want to avoid shower hose failures, you need to look for high-quality products, like those available in the mexen.pl online store. This way, you can save on water. Do not choose products available in hypermarkets, as they are not durable and often require servicing. There are products available in sets, which include a handle and attached shower faucets. When choosing them, it’s worth paying attention to what material they are made of:
- a hose with a metal braid – characterized by one- and two-layer braiding. This model is really durable;
- a plastic hose - has a fiber braid that provides greater resistance during mechanical injuries. It is softer and does not scratch the surface of the bathtub or shower.
Repairing a shower hose is possible. However, on the other hand, there’s no point in struggling with an old model when we have many really great, high-quality shower devices available on the market.
Related products
