Bath taps with a thermostat are easy-to-use products that can contribute to our relaxation during a bath. Like everything else, these items also need to be cared for appropriately. It's worth doing so, as this way it will function properly and we will get the maximum benefit from it.
Water flow pressure
For devices connected to water flow to work properly, they need the right pressure to facilitate the entire process. The same goes for bath taps with a thermostat. When buying them, you should read the accompanying booklet carefully. It contains not only the user manual but also the installation instructions and minimum pressure requirements.
The water flow pressure must be appropriate. If it's not as it should be, the bath tap with a thermostat we purchased will not work as it should. On the other hand, problematic operation will extend our bathing time and lead to unnecessary irritation.
Water flow pressure is, therefore, an extremely important factor. Poorly chosen pressure can cause many unwanted problems. Therefore, it's worth paying adequate attention to this topic when purchasing a bath tap with a thermostat.
Connecting to other devices
Bath taps with a thermostat have specific rules when it comes to connecting them to other bathroom fixtures. It's not recommended to use them in our bathrooms if the water intended for washing is heated using a gas heater or a dual-function flow boiler.
Such use can lead to the malfunctioning of both the tap itself and the devices mentioned above. Why does this happen? Well, when we turn on the water, the thermostat opens the hot water supply to its maximum extent to quickly achieve the desired temperature. This behaviour, in turn, forces the heating device to work at its maximum capacity. This results in water from the device being hotter than desired.
With such behaviour, the thermostat will start closing off the hot water supply, leading to the extinguishing of the flame in the mentioned devices. Therefore, careful consideration is needed when purchasing bath taps with a thermostat. It may turn out that their use causes more problems than pleasure.
Tap inspection and cleaning
Appropriate water flow pressure and recommended devices for connection are the basis for the correct functioning of bath taps with a thermostat. However, to enjoy it without problems for a longer period, regular inspection and cleaning are necessary.
It should not surprise us that bath taps with a thermostat require systematic cleaning to function for as long as possible. It is recommended to clean parts such as hoses, valves, and mesh seals. Proper maintenance of these parts will determine the lifespan of our bath tap with a thermostat.
If we want to enjoy a pleasant, quickly prepared bath in a nice atmosphere, we should regularly check if the tap with a thermostat looks and works exactly as it should.