Bath Systems Step by Step

No matter what type of bathtub installation or bathtub enclosure method clients choose, it is necessary to install a bath system. At first glance, it may seem like a simple task involving the installation of a showerhead and possibly a bathtub faucet. However, this topic should be approached comprehensively, and remember to install the entire bath system. So, which bath system should be selected for a particular type of bathtub?

Which bath system is the best?

We can talk about two basic types of bath systems. One is an over-the-wall system, the other is a recessed system. Freestanding bathtubs are also equipped with a system that is not attached to the wall in any way, only to the floor. Which one is the best? That is the question!

Recessed Bath System

The installation of a bathtub with a recessed system must take place before the wall is covered with ceramic tiles. At that time, the entire system is first installed, and only then are plasters and tiles laid. In this way, only the handles and necessary elements that are used daily are visible outside. It looks extremely elegant and professional, and the bathroom presents a modern, minimalist look.

Recessed systems and their installation are becoming increasingly popular both in shower cabins and in the case of bathtubs. However, it should be remembered that in the event of a failure, it is necessary to remove all layers located above the bath system. Therefore, it is worth opting for high-quality equipment, such as plastic ones, that will not quickly wear out due to normal use.

Over-the-Wall Bath System

If clients choose rectangular bathtubs and bathtub enclosures, they are often offered over-the-wall systems. Similarly, if they choose a freestanding bathtub. In this case, the assembly kit contains all the necessary elements, including mounting brackets, which allow the system to be mounted over the bathtub. It should be noted that it is placed over the edge of the bathtub so that there is no risk that the height of the bathtub will prevent comfortable use of the system.

Such a system looks slightly less attractive than a recessed system, but priority should be given to the reduced risk of serious malfunctions and the possibility of quickly resolving them if they arise. There is no need to break through the wall to access the entire system - this is an undeniable advantage! Besides, whether someone prefers an over-the-wall or a recessed system is a purely individual matter, right?

Freestanding Bathtub - Which Bath System?

A freestanding bathtub can be positioned in various ways. If it is located next to one of the walls, the installation of the bath system should look similar to that of a built-in bathtub. It is then mounted on the wall or under the plaster. However, if the freestanding bathtub is located, for example, in the middle of the bathroom, several factors must be considered to enable the proper installation of the system. This is important because (let's be honest) freestanding bathtubs look best in the middle of bathrooms!

First of all, using a spirit level, identify the best place to set up the bath system stand. The showerhead and faucet are then placed on it. It is important that they are high enough to allow easy use. Therefore, the bathtub is first introduced and bathtub installation takes place, and then it is time for system installation. Holes should be drilled in the floor to allow the installation of the bath and frame, so it's worth carefully considering where it should be located.

The installation of the bath system on the wall is extremely popular, just like the freestanding bathtub. These are bathroom equipment elements gaining more and more supporters among people with adequately spacious bathrooms. To ensure that renovation is not needed shortly, it is worth investing in the highest quality equipment and materials, with a guarantee of high durability. Then, both bathtub installation with a frame or enclosure will work perfectly.