Types of Toilet Flushes - What Should You Pay Attention To?

14.06.2021

Category: Guides

Author: Mexen

The toilet and the flush are parts of bathroom fixtures that, in addition to their practical application, can set the direction for interior design. If you focus on modern design and prefer elegant solutions, you will surely appreciate minimalist concealed sets with stylish flush buttons. Check which solutions will work best in your bathroom, which fit the concealed frame, and which suit more traditional solutions.

Flushes in Traditional and Modern Edition

Old-fashioned flush mechanisms, operated by pulling a cord or pressing a built-in button, are slowly being replaced by modern concealed flushes. Contrary to appearances, it's not just about aesthetics - traditional solutions generate higher costs because users cannot regulate the amount of water used.

Another important issue is hygiene - old plastic flushes are difficult to keep clean and look unsightly after a short period of use. By choosing a concealed frame, you will not only increase the attractiveness of the bathroom's interior but also reduce water consumption by up to 50 percent! And as for potential failures? Don't worry! In both cases, most repairs concern the replacement of the valve seal or the adjustment of the float's position.

Bathroom Flushes - Types and Characteristics

One of the most popular types of flushes is the bottom and top flush, installed with a compatible toilet bowl. An important advantage of this solution is the low cost of purchasing fixtures - the bowl and tank can come from different manufacturers. Plastic flushes are light and cheap, which is especially important when installing a top-flush. In the case of a bottom-flush, it is possible to install ceramic buttons that regulate the amount of water used.

Flush in a WC Compact

Another type of mechanism is the flush in a WC compact, which allows the installation of a dual-button. Unfortunately, this solution is completely impractical in small spaces - both the cistern and the bowl are quite large, making installation difficult.

Concealed Flush

The clear favorite in the ranking is the concealed flush - small, built into the wall, and very discreet. Its installation requires a concealed frame and a flush button for releasing water. Made of chrome or stainless steel, available in various colors, hygienic and convenient to use, it can become an aesthetic decorative addition and completely change the appearance of the room.

Concealed Bathroom Flushes - What to Look Out For?

Planning a bathroom renovation but having trouble choosing the right fixtures? Remember that concealed flushes are available in different capacity variants, with 7.5 and 9 liters being the most recommended. If you're looking for long-term savings, choose a divided flush button that allows individual adjustment of the water amount used during toilet use.

Which Concealed Tank to Choose?

When choosing a concealed set, pay attention to the cistern - flat and single-piece tanks take up less space and work better in small spaces. The least failure-prone are vessels made using blow molding technology. If you want to ensure the WC set is fully compatible and functional, trust one reliable manufacturer, such as Mexen, where you can purchase both a toilet bowl and concealed frames with accessories. Choose a comprehensive solution and create a bathroom that fits modern trends.